This garden bench is delivered free of charge in packages throughout the Benelux and Germany

The sofa consists of 4 parts: left side, right side, backrest and seat. Assembly is very easy (10-15 minutes). Construction with identically numbered mortise and tenon joints. Assembly instructions: Place one side flat on the floor so that the holes for the seat and backrest are visible. Insert the backrest into the holes in the side and tap it gently with a bobbin and hammer if necessary. Now install the seat by pressing the pins of the seat into the holes on the side. Please note that the numbers on the various components are opposite each other. Take the second side and attach it. If necessary, also tap with a bobbin and hammer. You will see 5 holes in each side (2 at the front, 3 at the back) where the supplied dowels must be inserted. Please note: it is not possible, nor intended, for these to be hammered in completely. The dowels are always longer than necessary. You can saw off the part that still protrudes, preferably with the saw blade of a hacksaw.

Don't want your sofa to age? Then use teak exterior from rubio monocoat. 100ml is sufficient for the entire sofa.

Would you rather receive the sofa fully assembled? This is possible for a small additional charge.

Technical details:
Width: 150 cm
Height left / right: 91.5 cm
Height middle: 93 cm
Depth: 70 cm
Front seat height: 44 cm
Rear seat height: 38 cm
Seat depth: 50 cm
Legs: 5 x 5 cm