This garden bench is delivered in package form for free throughout the Benelux and Germany
The sofa consists of 4 parts: left side, right side, backrest and seat. Building up is very easy (10-15 minutes). Construction with equally numbered pin-hole connections. Assembly instructions: Lay one side flat on the floor so that the holes in which the seat and backrest must go are visible. Insert the backrest into the holes on the side and tap it gently with a bobbin and hammer if necessary. Now install the seat by pressing the pins of the seat into the holes on the side. Make sure that the numbers on the various components are opposite each other. Take the second side and attach it. If necessary, also knock with a bobbin and hammer. In each side you will see 5 holes (2 at the front, 3 at the back) in which the supplied dowels must be placed. Note: it is not possible, nor is it the intention that these are completely beaten. The dowels are always longer than necessary. You can cut off the part that still protrudes, preferably with a hacksaw saw blade.
Do you not want to let your bank become grey? Then use teak exterior from rubio monocoat. 100ml is sufficient for the entire bench.
Would you rather receive the sofa fully assembled? This is possible, only within the netherlands, at a small additional cost.